Handwerkerstr. 6, D- 59597 Erwitte

Tel: +49 2943 9790-0 Fax: +49 2943 9790-90

Niederlassung Süd

Am Fuchsgraben 13 , D- 77880 Sasbach / Ortenau

Tel: +49 7841 68136-0 Fax: +49 7841 68136-25

Niederlassung Nord

Crocodile Clinch Unit CCU 523

Description

523_bigHigh clinch force along with short cycle time characterizes the BTM crocodile unit.
The  integrated rotary suspension design allows rotating the clinch unit  by 360° without twisting the hydraulic and pneumatic control hoses. The rotary suspension is equipped with detents every 90° for easy handling in rectangular
products.
This clinch unit can be powered by a pneumo-hydraulic intensifier (Booster) with just 6 bars air supply or with a hydraulic power pack and electric controls.

Media

 

 

Catalog:

523_small

Spezifications

Weight of clinch gun: 8,0 kg
max. Clinch force: 44 kN
Cycle time: 1-1,5 s
Power stroke: 6 mm
Opening: 41 mm
Throat depth: 50 mm
Max. sheet metal thickness: 3,5 mm
Power supply: pneumo-hydraulic Booster 360 bar
at 6 bar air supply
hydraulic
at 380 V power supply

 

Rechargeable battery clinch and pierce unit ULBG 101

Description

ULBG101_big_2The new BTM clinch and pierce unit ULBG101 is characterisized by its compact and ergonomic construction principle. In addition to efficient Ni-MH  rechargeable batteries the unit is also optionally available with a power supply  for all common voltage systems.
Its  low handling weight, the slim construction and the fast piston speed enable to operate in narrow areas.
The stroke is activated by one push button, when reaching the front position retract stroke will be initiated automatically. The procedure can be interrupted at any time.

Media

Catalog:

ULBG101

Spezifications

Weight of clinch unit: 3,6 kg*
Length*: 420 mm
Width: 68 mm
Height*: 140 mm
Max. clinch force: 22 kN
Power stroke: 10 mm
Clinch toooling: up to Ø 3.8 mm Tog-L-Loc®
battery: 9,6V/3Ah Ni-MH
Battery capacity: approx. 250-280 strokes
Charging time: approx. 60 min.

 *  C- Frame AL with 38 mm throat depth
** depends on style of tooling head

Fully Adaptable Units

Description

fully_adaptable_250
The Fully Adaptable Unit is all about flexibility due to its customizable features. Joint size, punch and die accessibility, throat depth, opening, force requirement and ergonomics can all be adapted to your requirements to make the perfect combination for maximum productivity and cost effectiveness. .


  • Clinches a maximum total thickness of 4mm mild steel.
  • May Require a Special Hydraulic Pump. Contact BTM.
  • A high degree of flexibility and power.
  • A customized solution for complicated joining locations.
 

Configuration

Fully adaptable units can be configured to suit the accessibility requirements of your parts.
Click on the catalog at the bottom of this page for more information.
     
 

Typical Part Configurations Compatible With Fully Adaptable Units

10sj  11sj  12sj  13sj  15sj  17sj  18sj  19sj  21sj  23sj  25sj  26sj

 


Media

Catalog

cpe3

Rechargeable battery clinch and pierce unit ULBG 601

Description

ULBG601_big_2The BTM clinch and pierce unit ULBG 601 is been designed as a mobile and robust hand held clinch unit with a very high joining force at low handling weight. Therefore it is very adapted to a commitment at construction areas.
Due to its ergonomic and compact construction principle, easy handling is possible even with narrow dimensions.
The joining stroke is activated by one push button, when reaching the front position retract stroke will be initiated automatically. The pressing procedure can be interrupted at any time.

Media

Catalog:

ULBG601_small2

Spezifications

Weight of clinch gun*: min 5,5 kg
Length*: min. 450 mm
Width: 95 mm
Height*: 310 mm
Max. clinch force: max. 60 kN
Power stroke: 10-25 mm adjustable
Clinch tooling**: up to Ø 6.4 mm Tog-L-Loc®
Akku: 14,4V/2,6Ah Lithium-Ionen
Battery capacity: approx. 200 strokes (depends on total stroke length)
Charging time: approx. 45 min

 * depends on C-Frame
** depends on style of tooling head

7006 Units

Description

7006_227
These hydraulic hand operated units are most commonly used for prototyping and small production runs. There are two basic units in the 7006 style, a standard unit which can utilize 3.0 or 4.6 size Tog-L-Loc® tooling, or a heavy duty unit which can utilize 5.5 Tog-L-Loc® tooling. Each unit is available in one of two (2) different anvil styles, the style of anvil required depends on the design of part being joined. A hydraulic pump and a spring or air balancer (sold seperately) is required to operate the unit. For increased flexibility, an optional gyro ring can be purchased from BTM which will allow the unit to rotate 360o on 3 axes.


  • Clinches a maximum total thickness of 4mm mild steel.
  • Requires a Hydraulic Pump (BTM HydroPak Unit).
  • Different Anvil Styles Available.
  • Optional Gimbal Mount to ease positioning and increase flexibility when clinching hard-to-reach locations on a part.
 

Standard Units

Standard 7006 units include the traditional unit which can utilize 3.0 or 4.6 Tog-L-Loc® tooling, and a "heavy duty" unit which uses 5.5 Tog-L-Loc® tooling. Please consult the catalog at the bottom of this page for more information.
     
 

Typical Part Configurations Compatible With 7006 Units

10sj  11sj  12sj  13sj  14sj  15sj  17sj  18sj  19sj  20sj  23sj  27sj       

 


Media

Catalog

cpe3


Warning: Parameter 2 to modChrome_artnostyle() expected to be a reference, value given in /homepages/28/d19942598/htdocs/j35/templates/btm_v33_1/html/modules.php on line 39
Our website is protected by DMC Firewall!